Tag

fishing carp

Browsing

Excellent natural bait for the vast majority of fish

Preparation:

  1. Soak hemp seed covered with water for 24 hours.
  2. After 24 hours, put the seeds covered with water in a pan and boil
  3. Simmer for approximately 30 minutes.
  4. Hemp seeds are cooked when most of the seeds have split and when little white shoots are seen.
  5. The seeds are now ready for fishing.
Hemp is a great way to attract fish (carp, roach, bream, barbel, tench, chub, …) any time of the year.


Some Facts About Hemp – Seeds

  • Hemp is the common term for a variety of plants in the Cannabis family. 
  • Hemp and its seeds have been used for thousands of years by various cultures.
    • Oldest known records of hemp farming go back 5000 years in China, although hemp industrialization probably goes back to ancient Egypt.
  • Hemp has the potential to replace plastic material.
  • One of the most important hemp seed benefits is its high quantity of proteins.
  • Hemp is incredibly sustainable.
  • Hemp seed food products are also considered more allergy-free than many other seeds.
  • Hemp seeds are high in nutritional value and contain 20 different varieties of amino acids and all nine of the essential amino acids.
  • Hemp and marijuana are not the same.
  • It was legal to pay taxes with hemp in America from 1631 until the early 1800s. (LA Times. Aug. 12, 1981.)
  • Refusing to grow hemp in America during the 17th and 18th centuries was against the law.
  • For thousands of years, 90% of all ships’ sails and rope were made from hemp.
  • Henry Ford’s first Model-T was built to run on hemp gasoline and the car itself was constructed from hemp.
  • In 1916, the U.S. Government predicted that by the 1940s all paper would come from hemp and that no more trees need to be cut down. Government studies report that 1 acre of hemp equals 4.1 acres of trees. Plans were in the works to implement such programs. (U.S. Department of Agriculture Archives.)
  •  80% of all textiles, fabrics, clothes, linen, drapes, bed sheets, etc., were made from hemp until the 1820s, with the introduction of the cotton gin.




hemp is split
Almost cooked.
hemp is split

Hemp seeds can be kept in the refrigerator for a few days (3 to 5 days maximum) or frozen and taken out of the chest when you need them for fishing.

Natural protein fishing bait.

hemp is split




When the hemp seeds are cooked there is no need to add anything as the seeds are already attractive enough for fish (high in proteins, natural oils, feed stimulators and attractants).

I most often add hemp oil to the warm seeds for even more attraction.



most of the hemp seeds have split

Conclusion

Cooked seeds can be used in spod mix, a great addition to ground bait mix, hook bait, It can be used on its own, etc.

My opinion is that this is one of the very rare baits that you can cook in your wife’s kitchen (talk to your wife first anyway ?) without stinking up the kitchen with unpleasant aromas, such as cooking chickpeas, corn, fish meal boilies with the aroma of squid, octopus, liver, monster crab and so on.

The smell of cooked seeds is very pleasant, no wonder fish love it.



Till next time …

 tight lines and wet landing nets!

Author: Marina Kropec


Disclosure – if you buy anything using links found in this blog post, I may make a small commission. It doesn’t cost you any more to buy via these affiliate links – and please feel entirely free not to do so of course – but it will help me to continue producing content. Thank you for your support .

THANK YOU for all of your support, for visiting my blog, commenting, and sharing my posts with your friends and social media.

This video was not paid for by outside persons or manufacturers.

No fishing tackle or bait or anything was supplied to me for this video.

The content of this video, photos and my opinions were not reviewed or paid for by any outside persons.

Which carp rig to choose?

A huge variety of carp fishing rigs are used today. They differ in complexity, the time of year, bait presentation, usability on different types of bottoms, and so on.

I have tied a lot of different carp rigs already and I use some of them on almost every fishing trip or have them with me in my korda rig safe. This time I will show you through photos how I tie a carp screw rig. I have been using this rig successfully for a long time so I decided to present in steps how to tie it.

pop up rig

I use this rig mainly for pop ups, but it works great for all other baits as well. The only thing I need to note, If you use baits that are quickly softened in the water, the bait may eventually fall off. It can be used on all different types of bottom and when is not too much weed or debris in the water.



What you need to tie a knotless knot screw rig?


Here’s how you tie it up, in pictures below:

  • Place a bait screw onto the hook shank.
  • Add hook bead (slowly and carefully, the sharpness of the hook can lead to unpleasant injuries quickly)

Cut off the length of the hooklink. Cut off a slightly longer hooklink because the final length of the carp rig is reduced by knots (swivel, hook knot, knotless knot, hair rig, loop knot, … and the like).


  1. First insert the selected hooklink through the hook eye.
  2. Hooklink is now through the hook eye.
  3. Wrap the hooklink material around the hook body.
  4. Wrap hooklink around hook shank (5x – 10x times, depending on hook size, pattern and shape, hooklink thickness, carp rig type and individual decision, but not beyond where the hook point begins).
  5. When your are satisfied with the number of wrappers, then pass the hooklink back through the eye of the hook (recommend for beginners). For better hook strength I recommend wrap the hooklink in the opposite direction (2x – 4x times) and then put hooklink through the ear of the hook.
  6. Always end knotless knot (whith or without hair) by pushing the hooklink end through the hook’s ear toward the hook point. Very important: If you do not do this in this direction, the hook does not turn properly in the carp mouth.
  • Add anti tangle sleeve to hooklink.

Clinch knot that is very easy and fast to tie, strong, reliable and uncomplicated. I recommend all beginners to first learn how to tie this knot. Below I described how to tie this knot. I am sure that after 2x – 3x attempts you will have already mastered how to make it. As they say practice makes perfect ?.

  1. Thread hooklink end through the eye of swivel.
  2. Make 4x or more turns around the hooklinks.
  3. Thread the hooklink through the very first loop above the eye of the swivel.
  4. Always moisten knots, then slowly tighten the knot. Trim the tag end and blob it with a lighter.
  1. Attach bait (pop up boilie, tiger nuts, hard corn, bottom boilie, wafter, dumbells, imitation baits …) on bait screw.
  2. Add a small piece (amount depends on presentation method, boilie size and buoyancy, etc) of tungsten putty, for balance hook bait and efficient rig mechanics .
  3. FInally rig is ready for fishing.
  4. In the end I just check in the aquarium, bucket or similar how your screw rig looks like in the bottom. When you know how to tie a rig properly, it is not necessary to check every rig in the aquarium, but I recommend when we tie a rig that we have never had before. Better to check the rigs at home than to get to the fishing spot and find out that we need to tear down for example all 40 rigs and tie everything up again (fortunately this has not happened to me).


Till next time …

 tight lines and wet landing nets!


If you would like to use content from the Fishing Religion website (in whole or in part), please add a link to the contribution on our site in your post.


Disclosure 

Some of the links in this blog and in our videos may be affiliate links, and pay us a small commission if you use them. We really appreciate the support. Thank you for your support.

This site contains affiliate links for which I may be compensated. As an eBay Partner, I may be compensated if you make a purchase. As an Amazon UK Partner, I may be compensated if you make a purchase.





Well, we’re going fishing, fishing gear and food packed……….

This year’s winter temperatures are quite high but also very windy and rainy in my country. When I was planning to go fishing the weather got worse (as usual with a strong wind) and I had to postpone fishing several times. The forecast for Sunday was 16 degrees and sunny, the perfect day to go for my first winter fishing this year. Finally, I go fishing.

And Saturday came and with it the change of weather for Sunday (again a strong wind and showers). my boyfriend and I quickly decided to go fishing Saturday. Better a few hours fishing than nothing. We get our fishing gear quickly in the car and go fishing, finally.

When we got to the fishing spot I first prepared a groundbait for carp fishing. I have already prepared a groundbait dry mix at home (a combination of different ready-made mixes and other ingredients). I added some pellets and a little amount liquid krill additive to the mix. I slowly added lake water to the mix (mix thoroughly until a nice consistency and texture is achieved).

When you add water to the mix, you should always use the water from your fishery . Due to the different chemicals, I do not recommend that you use tap water or at least boil it before use.


While the groundbait was slowly getting wet, we prepared fishing rods and everything else needed to finally start fishing.

When we started fishing, the wind started to blow more and more. Hoping that the wind won’t affect the carp appetite too much and that at least one will be on the fishing mat.


I used pop ups of my own making (testing) and bought at the fishing store.

I used a naked helicopter system on both fishing rods. Instead of carp fishing lead I used a light method feeder lead (30gr or 1oz) filled with groundbait. I had already modified the feeder lead at home so that I could use it as a normal carp lead with a swivel.

Gusts of wind became more and more frequent and stronger. Hmmm , the wind forecast was for tomorrow. But maybe the weather scientists were wrong again.

Later I added some sweet corn to the groundbait and then fed each fishing spot with two groundbait ball and every half hour one smaller ball with fishing catapult. Carp and similar related fish eat very little in the winter, so I adjusted the amount of food accordingly. Hoping that the food will tempted any carp or fish of any kind ?.

Hoping that the sun’s rays will awaken some carp to feed.


My boyfriend and my best fishing companion put some food around the lead, which later turned out to be a great decision. After 20 minutes the top of the fishing rod bent and a bite alarm sounded…..fish on ?. After a short fight, the mirror carp showed up ( heavy between 4 to 5kg or 8 to 11 pound), but luck didn’t last long as just before the landing net the hook got rid of it ?. Let’s try to catch another one…

When the sun hid behind the clouds it became cold.

Except for a few slight beeps, there were no more bites that day. It was getting dark and it was time to pack the fishing gear and go home.

A wonderful day was spent by the lake and the view of the beautiful sunset at the end of the fishing day is invaluable to me.

Till next time …

 tight lines and wet landing nets!


If you would like to use content from the Fishing Religion website (in whole or in part), please add a link to the contribution on our site in your post.


Disclosure 

Some of the links in this blog and in our videos may be affiliate links, and pay us a small commission if you use them. We really appreciate the support. Thank you for your support.

This site contains affiliate links for which I may be compensated. As an eBay Partner, I may be compensated if you make a purchase. As an Amazon UK Partner, I may be compensated if you make a purchase.





It’s been for quite a few years (more than 12 years ) since I bought my first rig storage box. I think this box was the first on the market from the Korda company (please comment below if I’m wrong about this information). At that time, it was quite difficult to buy quality fishing equipment in Slovenia’s fishing shops, so every such new product in my fishing bag was very special. Even now it’s the same as not to be mistaken, but back then it was harder to get and also made it even more special.

I almost always make carp fishing rigs at home, because when I go fishing I prefer to focus on fishing tactics, watching the water, taking pictures, recording video, reading, … , so i decided to buy another box for rig storage. Because I am more than happy with the quality and and functionality of the older box I decided to buy the latest Korda rig safe large.



Old version – Korda rig storage

  • After so many years of use and it still looks good.



  • Small abrasion on plastic, but only visual damage.


  • Ruler on the box. Marked length 30cm or 12 inch.

  • Only the plastic on the cap has broken, which of course is understandable after countless times opening and closing.

  • Visible use with innumerable holes in the foam.

  • There was no separate space for hooks.

Latest version – Korda Rig Safe Large

  • Nicely packaged in hard plastic packaging. Let’s open the box.

  • Many carp rigs can be made before filling this box. The winter months will pass quickly.

  • Very practical for different types of rigs.

  • My cat came to see what i bought this time.

  • Even more detailed ruler than the older one (marked half centimeters or inch). Marked length 30cm or 12 inch.


  • Double pins for rigs that haven’t not yet finished with a loop or swivel and decide on the length when you arrive at the fishing spot.





My opinion on the new Korda rig safe large: PROS and CONS.


Conclusion

The first impression of a newer box (Korda rig safe large) gave me the feeling that I would carry this box with me for fishing at least as long as the old one I have.

My opinion: if you want a quality, durable and lightweight box for storing your rigs, this rig safe box is one of the best choices to buy on the market. The decision is, of course, up to you.

Till next time …

 tight lines and wet landing nets!


If you would like to use content from the Fishing Religion website (in whole or in part), please add a link to the contribution on our site in your post.


Disclosure 

Some of the links in this blog and in our videos may be affiliate links, and pay us a small commission if you use them. We really appreciate the support. Thank you for your support.

This site contains affiliate links for which I may be compensated. As an eBay Partner, I may be compensated if you make a purchase. As an Amazon UK Partner, I may be compensated if you make a purchase.

In the summer time we often see carp moving under the surface of the water. Sometimes carp move very slowly or just stand still so it is very important not to scare them. Anything that splashes loudly into the water would easily scare them away.

Fly fishing for carp in the summer when carp not eating much can be successful in the hot part of the day. I advise using Polaroid glasses because the carp can be seen more easily at the water surface.

Hmmm which fly to use?

Anyone who does not have a fly fishing rod can use a surface float for cast fly.

I tied all the flies by myself, so I was especially happy for every carp I caught.

I use 5/6 weight fly fishing rod.

Average weight of carp in this lake is 7 pound.

It was a great pleasure to catch a carp on a fly rod.

The thin monofilament was invisible to the careful carp.

A gentle cast and a carp picked up the fly. Catching this carp was also the last catch of this wonderful fly fishing day.

Till next time …

 tight lines and wet landing nets!


If you would like to use content from the Fishing Religion website (in whole or in part), please add a link to the contribution on our site in your post.


Disclosure 

Some of the links in this blog and in our videos may be affiliate links, and pay us a small commission if you use them. We really appreciate the support. Thank you for your support.

This site contains affiliate links for which I may be compensated. As an eBay Partner, I may be compensated if you make a purchase. As an Amazon UK Partner, I may be compensated if you make a purchase.

Always carrying a lot of heavy equipment with me, even on short fishing trips, I decided to buy a lighter and smaller rod below the one I have. I know the easiest choice is banstick, but it is very difficult to get stuck on hard ground (rocks, concrete,…).

I was looking for a black colored rod pod, low height of any mark that would fall into my eyes. After some searching time, I was shortlisted under Fox Stalker A +, which I eventually bought.

1. Video YouTube

Video Fox Stalker Plus Pod Unboxing on my YouTube channel, for more click below ??????????.

2. Finally i have it

The first impression was very good. Even when opening the box, I was very surprised by his appearance.


3. Rod pod size

Rod pod is very easy and quick to assemble when it becomes routine in about 2-4 minutes. Rod pod is the lowest at 23 cm in height and can be increased to 42.5 cm. Rod pod has the lowest at 23 cm in height and can be increased to 42.5 cm. The minimum length is only 69 cm long and can be extended to a maximum length of 106 cm.

4. A small toy for the big ones

The only doubt I had with this rod pod was that it could be carried away by smaller fish or a little stronger wind. But to me it never happened even though I was fishing very close range or with a much tighter reel.

For greater stability, you can purchase specially made anchors for this rod pod.

Mini pod anchors

Till next time …

 tight lines and wet landing nets!


If you would like to use content from the Fishing Religion website (in whole or in part), please add a link to the contribution on our site in your post.


Disclosure 

Some of the links in this blog and in our videos may be affiliate links, and pay us a small commission if you use them. We really appreciate the support. Thank you for your support.

This site contains affiliate links for which I may be compensated. As an eBay Partner, I may be compensated if you make a purchase. As an Amazon UK Partner, I may be compensated if you make a purchase.